Rieger Spiral Fluted Reamer

Spiral fluted reamer and diamond-coated finish reamer. The reamers are made of high-quality steel with an ergonomically designed handle made of solid beech, varnished.

Rieger Bassoon Forming Mandrel

Rieger Forming Mandrel (Bär Model) Rieger mandrels with an ergonomically formed handle are made of damped and coated beechwood. The pin is made of nickel-silver. Specs Forming...

Bassoon Wire - Rieger .60mm (78 yds)

 Rieger .60mm Bassoon Wire For comparison, here is a chart showing the diameters of the wires. Brand Diameter (mm) Rieger Bassoon .60 Zebra 22 gauge .64   The...

Rieger Bassoon Reamer Stop

Stop reaming at exactly the right spot! This brass stop fits over a Rieger reamer (sold separately) and screws in place with the included hex wrench. Once you find the right location for your reed...

Rieger Gouged and Profiled Bassoon Cane

Rieger Gouged and Profiled Bassoon Cane Specs Total length: 120 mmBlade length: 30 mmShaft length: 30 mmDimension gouged: 1,25 mmDimension pass blade/shaft: 0,95 mmDimension middle profiled : 0,6 -...

Rieger Gouged Bassoon Cane

Rigotti Gouged Bassoon Cane Rieger Gouged Bassoon cane is gouged 1.25mm thick and is 120mm long. It is sold by the piece.   Gouged Bassoon Cane Hardness and Flexibility Ranges and Averages by...

Rieger GSP Bassoon Cane - 1A shape

Rieger GSP Bassoon Cane - 1A shape Rieger gouged, shaped, and profiled bassoon cane. This cane is shaped in the Rieger 1A shape. It is 120mm long. Sold by the piece.

Plaque - Rieger Contrabassoon and Bassoon Plaques

Rieger Contrabassoon and Bassoon Plaque The plaque for contrabassoon AND bassoon is a triangle shaped piece of plastic to be inserted between the blades of your contrabassoon or bassoon reed in...

Rieger Bassoon Shaper Tips

Bassoon Shaper Tips by Georg Rieger The Rieger Bassoon Shaper Tips are used in combination with the Rieger Bassoon/Contrabassoon Shaper Handle. Made of hardened steel, the shaper tip has a...

Rieger Bassoon Shaper Handle

Bassoon Shaper Handle by Georg Rieger The Rieger Bassoon Shaper Handle works in combination with any of the Rieger Shaper Tips for Bassoon or Contrabassoon to shape your cane for your reed-making...

Rieger Bassoon Cane Splitter

Rieger Bassoon Cane Splitter Splitter, splits tube cane into 4 equal parts for Bassoon, Baroque Bassoon and Contrabassoon.

Reamer - Rieger Contrabassoon Reed Spiral Fluted Reamer

Rieger Contrabassoon Reed Spiral Fluted Reamer

Mandrel - Rieger Contrabassoon Mandrel

Rieger Contrabassoon Mandrel

Rieger Oboe Reed Tip Cutter

Rieger Oboe Reed Tip Cutter This tool saves time and replaces the knife, ruler, and cutting block for clipping the tip when making reed blanks. An adjustable bed holds the reed at exactly the length...

Rieger Oboe or English Horn Cane Splitter

Rieger Oboe or English Horn Cane Splitter This splitter will split both oboe and English horn cane. The design of this blade begins at a small enough point to cut any size opening on a tube of oboe...

Rieger Bassoon Reed Tip Cutter

Rieger Bassoon Reed Tip Cutter Position the mandrel for the desired reed length. Then place the reed on the mandrel and bring the guillotine down, cutting the tip of the reed to the desired length...

Rieger Diamond-coated Reamer

Spiral fluted reamer and diamond-coated finish reamer. The reamers are made of high-quality steel with an ergonomically designed handle made of solid beech, varnished.

Rieger Bassoon Pliers

Rieger Bassoon Pliers Rieger Bassoon pliers with cutter and holes. Made in Germany.

Rieger Bassoon Holding Mandrel

Rieger Regular or Holding Mandrel (Rieger Model) Rieger mandrels with an ergonomically formed handle are made of damped and coated beechwood. The pin is made of nickel-silver...

6-Pin Bassoon Reed Drying Board by Rieger

Rieger 6-Pin Bassoon Reed Drying Board  This star shaped drying board holds 6 bassoon reeds. The pins are shaped to fit the reeds made with Rieger tools.

6-Pin Contrabassoon Reed Drying Board by Rieger

Rieger 6-Pin Contrabassoon Reed Drying Board  This star shaped drying board holds 6 contrabassoon reeds. The pins are shaped to fit the reeds made with Rieger tools.