Adam Oboe Shaper Tips - Milled (New)

We have just introduced new Adam shaper tips that are produced using a less expensive method. Unlike our original method of using wire EDM (Electrical Discharge Machining), these new tips are precision CNC milled with a margin of error of only ±0.01mm. While it is not as accurate to the original shape as those produced using wire EDM, it still achieves impressive accuracy while providing significant cost advantages.

Caleb

Has slightly bigger throat and belly than the Joshua +4 and is the most "rectangular" looking tip of the Adam tips.

Joshua

Adam Shaper Tip's narrowest shape. The sides are virtually parallel at the top.

Ruth

This tip is a copy of a famous tip designed by Mr. Jerry Kaplan of Chicago.

Samson

The throat and belly are similar to the Joshua, but the chimney is flared very slightly.

Sara

This tip has the same throat as the Joshua, but with the belly and chimney taken in slightly.

The numbers added to the shaper names indicate a .025mm difference for every 1 number added or subtracted. For instance, the Caleb -1 is .025mm narrower in all measurements than the Caleb.

All shapers and shaper tips have a 30-day trial period. Compare several, choose one, and send back the rest for a full refund minus shipping. Returns after the 30-day trial period will be subject to a 10% restocking fee in addition to the cost of shipping, but must be returned in like new to new physical condition.