Created with Sketch. Created with Sketch.

LU Advanced Bsn Cane Processing Tools & Supplies

In creating this list, I've done my very best to balance value and cost, and have only listed essential items. I know this is a big initial investment, but these materials will last you for years, perhaps even the rest of your life. Besides these personal tools, you will have access to other reed making equipment owned by the Liberty University Double Reed Studio.

  • Reeds 'n Stuff Bassoon Gouging Machine

    Reeds 'n Stuff Bassoon Gouging Machine

    Reeds 'n Stuff Bassoon Gouging Machine The Reeds 'n Stuff Bassoon Gouging Machine removes cane material from the inside of the tube. A beautiful design, the cane bed has a lever that moves to allow teeth to grip the stick of cane on each end and hinge...

    As low as $1,250.00
    Choose Options
  • Reeds 'n Stuff Bassoon Pre Gouger

    Reeds 'n Stuff Bassoon Pre Gouger

    Reeds 'n Stuff Bassoon Pre Gouger This Reeds 'n Stuff Pre Gouger for Bassoon not only planes the cane with a flat blade but also gouges it out to about 1.80 mm in the middle and then smaller on the sides with a circular blade. This is the Crank-Style...

    $900.00
    Add to Cart
  • Reeds 'n Stuff Bassoon Pre Gouger (Push-Style)

    Reeds 'n Stuff Bassoon Pre Gouger (Push-Style)

    Reeds 'n Stuff Bassoon Pre Gouger (Push-Style) The Reeds 'n Stuff Bassoon Pre Gouger is the older push-style tool. It has two feet that can rest against a desk with a right angle. You lay soaked cane against the blade, curve side up, and use the flat...

    $175.00
    Add to Cart
  • Reeds 'n Stuff Bassoon Profiling Machine

    Reeds 'n Stuff Bassoon Profiling Machine

    Reeds 'n Stuff Bassoon Profiling Machine The Reeds 'n Stuff Bassoon Profiling Machine is a very high-quality machine. The profiler is designed to remove bark from the stick of cane, creating what will eventually become the blades of the reed. The...

    $1,500.00
    Add to Cart
  • Reeds 'n Stuff Bassoon Tip Profiler Reeds 'n Stuff Bassoon Tip Profiler, in carrying case

    Reeds 'n Stuff Bassoon Tip Profiler

    Reeds 'n Stuff Bassoon Tip Profiler The Reeds 'n Stuff Bassoon Tip Profiler is designed to remove cane off the lay of the blades of a clipped reed or a blank. The tip profiler removes wood from 1/2 to 3/4 of the reed blade, leaving the back as thick as...

    As low as $1,700.00
    Choose Options
  • Rieger Bassoon and Contrabassoon Shaper Handle Rieger Bassoon Shaper Combination (Tip plus Handle attached)

    Rieger Bassoon Shaper Handle

    Bassoon Shaper Handle by Georg Rieger The Rieger Bassoon Shaper Handle works in combination with any of the Rieger Shaper Tips for Bassoon or Contrabassoon to shape your cane for your reed-making needs. The handle is designed as one functioning body,...

    $145.00
    Add to Cart
  • Rieger 1A Bassoon Shaper Tip

    Rieger Bassoon Shaper Tips

    Bassoon Shaper Tips by Georg Rieger The Rieger Bassoon Shaper Tips are used in combination with the Rieger Bassoon/Contrabassoon Shaper Handle. Made of hardened steel, the shaper tip has a protrusion end which is inserted into the shaper handle (which...

    As low as $150.00
    Choose Options
  • Rieger Gouged and Profiled Bassoon Cane

    Rieger Gouged and Profiled Bassoon Cane

    Rieger Gouged and Profiled Bassoon Cane Specs Total length: 120 mmBlade length: 30 mmShaft length: 30 mmDimension gouged: 1,25 mmDimension pass blade/shaft: 0,95 mmDimension middle profiled : 0,6 - 0,65 mm   Sold by the piece.

    $4.10
    Add to Cart
  • Rieger Gouged Bassoon Cane

    Rieger Gouged Bassoon Cane

    Rigotti Gouged Bassoon Cane Rieger Gouged Bassoon cane is gouged 1.25mm thick and is 120mm long. It is sold by the piece.     Gouged Bassoon Cane Hardness and Flexibility Ranges and Averages by Cane Brand     Hardness...

    $3.25
    Out of stock