Created with Sketch. Created with Sketch.

Cane Processing Machines

Bassoon cane processing machines help the reed maker prepare the cane quickly and efficiently to make the bassoon reed. 

  • Pressol Machine Oil

    Pressol Machine Oil

    This is the machine oil that Reeds 'n Stuff uses on their machines and is recommended to keep your machine in tip top shape.  The classic multifunctional oil dissolves and protects against renewed corrosion.  Eliminates squeaking and...

    $4.50
    Add to Cart
  • Reeds 'n Stuff Bassoon Cane Guillotine

    Reeds 'n Stuff Bassoon Cane Guillotine

    Reeds 'n Stuff Bassoon Cane Guillotine The Reeds 'n Stuff Bassoon Cane Guillotine is used to cut cane to length after it's been split into pieces. Though not long enough for most contrabassoon cane, the rod has an end stop that is easily adjustable with...

    $350.00
    Add to Cart
  • Reeds 'n Stuff Bassoon Gouging Machine

    Reeds 'n Stuff Bassoon Gouging Machine

    Reeds 'n Stuff Bassoon Gouging Machine The Reeds 'n Stuff Bassoon Gouging Machine removes cane material from the inside of the tube in a concentric shape. A beautiful design, the 120mm long cane bed has a lever that moves to allow teeth to grip the...

    $1,150.00
    Choose Options
  • Reeds 'n Stuff Bassoon Pre Gouger (Push-Style)

    Reeds 'n Stuff Bassoon Pre Gouger (Push-Style)

    Reeds 'n Stuff Bassoon Pre Gouger (Push-Style) The Reeds 'n Stuff Bassoon Pre Gouger is the older push-style tool. It has two feet that can rest against a desk with a right angle. You lay soaked cane against the blade, curve side up, and use the flat...

    $150.00
    Add to Cart
  • Reeds 'n Stuff Bassoon Pregouger Reeds 'n Stuff Bassoon Pregouger

    Reeds 'n Stuff Bassoon Pregouger

    Reeds 'n Stuff Bassoon Pregouger This Reeds 'n Stuff Pregouger for Bassoon not only planes the cane with a flat blade but also gouges it out to about 1.75 mm in the middle and then smaller on the sides with a circular blade. This is the Crank-Style...

    $800.00
    Add to Cart
  • Reeds 'n Stuff Bassoon Profiling Machine

    Reeds 'n Stuff Bassoon Profiling Machine

    Reeds 'n Stuff Bassoon Profiling Machine The Reeds 'n Stuff Bassoon Profiling Machine is a very high-quality machine. The profiler is designed to remove bark from the stick of cane, creating what will eventually become the blades of the reed. The...

    $1,350.00
    Out of stock
  • Reeds 'n Stuff Bassoon Tip Profiler Reeds 'n Stuff Bassoon Tip Profiler, in carrying case

    Reeds 'n Stuff Bassoon Tip Profiler

    Reeds 'n Stuff Bassoon Tip Profiler The Reeds 'n Stuff Bassoon Tip Profiler is designed to remove cane off the lay of the blades of a clipped reed or a blank. The tip profiler removes wood from 1/2 to 3/4 of the reed blade, leaving the back as thick as...

    $1,600.00
    Choose Options
  • Reeds 'n Stuff Tip Profiling Template, PM Reeds 'n Stuff Tip Profiling Template, FG1

    Reeds 'n Stuff Bassoon Tip Profiler Templates

    Reeds 'n Stuff Tip Profiler Templates These Reeds 'n Stuff Tip Profiler Templates are replacements for your tip profiling machines that give you different finishes of your reeds. There are three different templates available, though the standard can...

    $400.00
    Choose Options